Forklift Chain

Chain for Forklift - The life of the forklift lift chains can actually be lengthened with correct care and maintenance. Lubricating correctly is an excellent way to be able to extend the capability of this particular forklift part. It is really vital to apply oil every so often with a brush or other lube application tool. The volume and frequency of oil application needs to be adequate so as to avoid any rust discoloration of oil within the joints. This reddish brown discoloration usually signals that the lift chains have not been correctly lubricated. If this particular condition has occurred, it is very essential to lubricate the lift chains at once.

Through lift chain operation it is normal for some metal to metal contact to happen that can cause several parts to wear out eventually. Once there is three percent elongation on the lift chain, it is considered by industry standards to have worn out the chain. In order to stop the scary chance of a catastrophic lift chain failure from occurring, the manufacturer very much recommends that the lift chain be replaced before it reaches 3% elongation. The lift chain gets longer due to progressive joint wear which elongates the chain pitch. This elongation is capable of being measured by placing a certain number of pitches under tension.

So as to ensure proper lift chain maintenance, one more factor to consider is to check the clevis pins on the lift chain for signs of wearing. Lift chains are assembled so that the clevis pins have their tapered faces lined up with each other. Normally, rotation of the clevis pins is frequently caused by shock loading. Shock loading occurs if the chain is loose and then all of a sudden a load is applied. This causes the chain to experience a shock as it 'snaps' under the load tension. Without the good lubrication, in this particular case, the pins can rotate in the chain's link. If this particular situation happens, the lift chains should be replaced immediately. It is very important to always replace the lift chains in pairs to ensure even wear.


Click to Download the pdf

Forklift Parts

Parts for Narrow Aisle Forklift

Narrow Aisle Forklift Part - At first, few foresaw the extent of the influence that containerization would bring to the shipping trade. Benjamin Chinitz, a Harvard University economist predicted during the 1950s that containerization would benefit New York by allowing it to ship its industrial goods more cost effectively to the Southern USA than other areas could. He did not...

More

---

Parts for Pallet Lift

Part for Pallet Lifts - A pallet jack is an appliance built in particular for moving pallets of differing weights and dimensions. They may be used in conjunction with cranes, forklifts and other heavy duty equipment as an attachment piece or to be employed on their own. Pallet lifts are offered in a variety of configurations from numerous organizations who...

More

---

Side Tilt Carriage

Side Tilt Carriage - Rated by the tine carriage hoisting capacity, there are four sizings of hook type tine carriages. The hook type fork carriages have been standardized. The carriage bar spacing used for Class 1 is something like 13 inches and the Class 1 carriage is rated to carry loads as much as 2000lbs. The Class 2 carriage is...

More

---

Articulated Boom Lift Attachments

Articulated Boom Lift Attachment - Boom truck are often used by phone, cable television and utilities organizations as they have long folded arms which are typically folded over the roofs of business vehicles. On the end of the extension of extendable arms frequently sits a bucket-like apparatus. When a container vehicle has an extendable boom mounted the roof this is...

More

---

Terex Attachments

Terex Attachment - Terex Forklifts takes great pleasure in producing quality equipment that helps upgrade their customers' performance while standing by their goal to provide a cost effective yet reliable product line. Through numerous divestures and acquisitions planned to expand the product offering, Terex has a short time ago expanded dramatically. They have improved their geographic coverage to make it...

More

---

Parts for Telescopic Boom Lift

Telescopic Boom Lift Parts - Telescopic forklifts are vital pieces of machinery meant for any kind of mining or construction job. They are designed to be able to function and operate successfully in the harshest weather conditions. Telescopic forklifts are capable of withstanding whichever kind of terrain and are usually equipped with 4-wheel drive. These equipment are used of working...

More

---

Attachment for Komatsu Forklift

Attachment for Komatsu Forklifts - Komatsu Forklift U.S.A. Inc. has an outstanding reputation for building dependable and resilient lift trucks. Komatsu is recognized around the globe as a business with a rich heritage while maintaining an admirable benchmark of modernization and quality in both design and equipment manufacturing. Komatsu Forklift U.S.A., Inc., a division of Komatsu Forklift Co., Ltd., International...

More

---

Forklift Hydraulic Pumps

Hydraulic Pump for Forklift - Hydraulic pumps can be either hydrodynamic or hydrostatic. They are usually used in hydraulic drive systems. Hydrodynamic pumps could be considered fixed displacement pumps. This means the flow all through the pump per each pump rotation cannot be adjusted. Hydrodynamic pumps could also be variable displacement pumps. These models have a much more complicated composition...

More

---